• The forward and backward tilting of mast are controlled by hydraulic system.
• Pushing the lever ahead the mast will tilt forward, pulling the lever backward the mast will tilt backward.
• Both the forward and backward tilting speeds are controlled by the lever tilt angle and the accelerator pedals.

• The raising or lowering of forks are controlled by hydraulic system. Pushing the lever ahead the fork will be lowered, pulling the lever backward the fork will be lifted.
• The lifting speed is controlled by the accelerator pedal and the lift lever tilt angle.
• The lowering speed is controlled only by lever tilt angle, and is independent of the engine speed.

• Located beside the right hand side of the driver seat.
• Push forward is the truck forward direction, pull all the way back is the reverse direction of the truck travel.
• Put between forward and reverse is the neutral.

• Inching pedal located at the left side, the one at the center is the brake pedal. and Accelerator Pedal located at the Right Side.

Taiwan Combitech Co., Ltd.

160 Huei-Chung Road Taichung 407 Taiwan 

Tel: +886 2311-2413

 Fax: +886 2311-2415    

Contact: info@Combitech.com.tw  

http://www.combitech.com.tw       

¡@

Vietnam Representative Office

356/6/12 Bach Dang Street, Ward 14 

Binh Thanh District, Ho Chi Minh City, Vietnam

Tel: (84-8)551 2576

 Fax: (84-8)294 2848  

 Email: combitech@hcm.fpt.com.vn    

http://www.combitech.com.vn