3 - 7 |
BRAKE PEDAL INSPECTION
- The brake is important rot safe operation of forklift trucks. Brake pedal play should be within 20 ~ 30mm, if the play is excessive or if braking effect is poor, the brake pedal should be adjusted to ensure safety.
|
| ¡@ |
¡@ |
3 - 8 |
TYPES AND RIMS INSPECTION
- It is essential that the tyres are inflated at proper perssure at all times. A low pressure will shorten tyre life and increase fuel consumption. If the pressure at the left and right tyres differ, steering will become unstable or heavy.
- To check whether the pressure are within recommended values. Remove the tyre valve cap and measure the pressure with type pressure gauge. For the forklift trucks with 1.5T load capacity, front type pressure is 7 kg/cm (100 psi), rear type pressure is 6.3 kg/cm2 (90 psi). For the forkilft trucks with 2.0T, 2.5T 3. OT load capacity, front tyre pressure is 7.7 Kg/cm2 (1 10 psi).
|
| ¡@ |
¡@ |
3 - 9 |
HUB NUT INSPECTION
- Mock the hub nuts to see if they are tight, and tighten the loose. Please note, in order to tighten the nuts with uniform and maximum force. Tighten the hub nuts by symmetry and not by order.
|
| ¡@ |
¡@ |
3 -10 |
AIR CLEANER INSPECTION
- Air cleaner keeps.the dust from flowing into engine. After certain period of time, the dust wlil stay on the cleaner. Without regular cleaning, the dust will get in the engine cylinder, which will seriously affect the engine life and performances.
- To clean air cleaner:Open the engine hood, make sure that it is securely locked, then open the cleaner cover, take the ftiter out, close the cleaner cover immediately, blow the filter from inside tp outside with compressor air or wipe it with clean cloth.
- To assemble air cleaner, reverse the preceding sequence
|
