• The hour meter operate when the engine switch is turned on and stops when the engine swiIch Is turned off.
• The cumulative operating time of the forklift truck engine will be registered on the 5-digit hour meter.
• By using hour meter you can make an accurate determination when to have the truck maintainence service made or as a standard of rent time.

• The gauge indicates the amount of fuel in the fuel tank.
• Turning on the engine switch will cause the gauge pointer.

• When the engine switch is turned on, the pointer ill indicate the engine coolant temperature.
• Normally the pointer will indicate in the range around 85 deg.C.

• When the engine switch is turned on, the pointer ill indicate the Transmission oil temperature.
• Normally the pointer will indicate in the range around 95deg.C.

• The warning light indicate whether the engine oil is at notmal pressure.
• As the engine switch is turned on, the warning light will be up after the engine strats for a while and the oil pressure rises to normal value, then the light will be out.
• If the light stays on while the engine is running, please stop the engine immediately and check the oil level.

• This light indicate the generating condition of alternator.
• The light (CHG) will be up when the engine switch is turned on and down when the engine starts. Otherwise, check the Alternator.

Taiwan Combitech Co., Ltd.

160 Huei-Chung Road Taichung 407 Taiwan 

Tel: +886 2311-2413

 Fax: +886 2311-2415    

Contact: info@Combitech.com.tw  

http://www.combitech.com.tw       

¡@

Vietnam Representative Office

356/6/12 Bach Dang Street, Ward 14 

Binh Thanh District, Ho Chi Minh City, Vietnam

Tel: (84-8)551 2576

 Fax: (84-8)294 2848  

 Email: combitech@hcm.fpt.com.vn    

http://www.combitech.com.vn